Dear all
I would like to know from your experience the number of hours you put in to design an excavation project (less than 20m) assuming you have all geotechnical data, lab tests, and loads ready.
thanks
I am designing a pile foundation to support 8000 kN axial load + 4000 kN lateral load + 600 kN eccentricity moment.
Piles are 1m in diameter and 23 meters deep
Soil profile mostly clay: first 10 meters Su = 80kpa and the rest Su = 200 kpa and groundwater level at the surface;
From analysis...
Dear all
I am designing a pile foundation for a new building. the columns are closely spaced so I decided to place them on a single pile cap with a depth of about 1 meter, each column will transfer the load to the individual pile. The pile cap will also be connected with ground beams.
Is...
Dear all
I am the client's representative, working with a 2 story building that was initially designed to be supported on a shallow foundation, no geotechnical investigation was carried out and it was simply assumed that the ground is dense sand with an allowable bearing capacity of 100 kpa...
