Hi all
Can anybody please explain how to calculate the reactions at bearings for helical gears mesh at an angle (30deg),I know how to calculate tangential.separating and axial force ,but my concern is to calculate the reactions at an angle of gear mesh.
Thanks
Nivrah,
I don't agree the explanation given by you regarding the load transfer due to mounting of bearings.
Usually float bearing will not take much of the load as that of fixed bearing.
one of the reason may be mounting procedure,please check the mounting of float bearings check that the...
Hi Nivrah,
If you increase no. of balls load distribution b/n balls will reduce naturally.
But i would suggest you to use case carburize bearing rather than Through harden,
This may be one of the reason for dent on ball.Numerous failures means not only because of mountings but I also suggest...
Mike thanks for reply,
I know that how to calculate separating force & tangential forces.
My concern is how to calculate the bearing reactions and selection bearing based on this. as bearings are mounted on the axle,traction motor mounted on the bearings and it will rotate with the axle and...
Can any one please explain the procedure to calculate reaction at bearings for a nose suspended traction motor which mounted on a axle and whole mass is suspended,other end of it is mounted to bogie.For refernce atached is the general arrangement dwg.Please help if any body knows about...
