Whoa big mistake in my power figure there.,,,
torque hit 385 nm @ 4730rpm = 347 HP corrected
torque peak 390 nm @ 5079 rpm = 377 HP corrected before falling off to 360 nm at 5510.
As mentioned I fitted the 5 x 6 PWR intercooler after the turbo and the top end butt dyno tells me there is no...
Dear All
Just a quick note to say thanks to all above for their help. The twin charge set up is running superbly. What an awesome torque curve. I have 390 nm of torque at 5000 rpm, with a lower peak HP of 190 FWHP. I am now adding a 5 x 6 (barrel air/water) after the turbo as I am timing...
Thanks to all for your input. After stripping the heads off I luckily only had a pushed out head gasket with no damage to pistons/ rings etc. So the engine is in and I will run it up normally aspirated before taking it to a tuner. I want to add another intercooler after the turbo but packaging...
Dear Madmac
It's very early days yet in respect to boost as I was still doing basic fuel tuning on the road when the gasket went. I am yet to pull the heads off to determine what happened but I know I have a failure in the gasket as coolant was disappearing and the temperature was soaring...
Dear All
Following on from Madmac 666 and his efforts with his Evo, I have completed a twin charge build on an Alfa33 16V. Sadly whilst road tuning last week I had a head gasket let go and this weekend I will strip down the heft hand head to inspect.
I have a TD06 20Gturbo flowing into an...
