Hi Guys,
Can we use flame arrestor and spark arrestor interchangeably? What is the difference in terms of application?
I plan to build a power pack for an Oil Spill Equipment on board Floating Storage and Offloading (FSO) vessel.
1. Which is the more suitable component to be installed on a...
Hi Guys,
I am designing an Oil Boom that spans 1000m in length. The boom is assembled from 10m sections, connected by a 10mm Stainless Steel 316 pin joint at each section. The top side of the boom is strengthened by a 7 tonne sling. Ideally, the drag force should be transmitted to the sling to...
Hi Guys,
Universal single joints are capable to operate at up to 45 degree working angle. I am currently ordering from a manufacturer and it is stated that the maximum operating Torque is 252 N.m (at 5 degree working angle). The material is Stainless Steel 316 (Marine Grade) with the following...
Hi Guys,
I am designing an oil boom using PVC Reinforced Polyester. Material thickness is 0.9mm. I have determined the Breaking Strength (Grab Test Method) for fabrics as per ASTM D751-06 (2011) and the result is around 3500 N/50mm.
1. How do I calculate the burst pressure based on the...
