Search results for query: *

Mark, your answer pointed me to the right spot. I was turning it on a second time. I went into the Speed & Feeds within the Teach "Profile Operation" and set it to none. That totally fixed the problem. Thanks for your help.

Mark, thank you for responding. Yes. The RPM is already running, then I make a rapid "Linear Move", then I make another "Linear Move" at .100 IPR, then I program a "Profile Cut" at .020 IPR. The spindle is turned on again before the "Profile Cut". I don't want to turn it on again since it's...

NX 10 Lathe Programming Teach Mode --- How do I turn off the RPM output when using the "Profile Cut Selection". I have already turned on the spindle at the M00 restart and made several "Linear Moves" when I need the profile.

Lathe__80 deg. diamond tool- Rough cut down face & 1/2 of 1.750 radius. Turn extension dia. & the remaining half of 1.750 radius. How do I make NX overlap the stopping point on the turning & radius cut? Right now it stops at the same point in the radius for both cuts. I've tried all of the...

Mark Rief, I believe that's a parametric canned cycle. I'm just using straight turning, facing and cutting radii. I couldn't find anything on it in the training manual. Thanks for clearing it up for me. Curtis E. Wright

Three options are listed > Linear Only, Circular and Machine Cycle. I understand Linear Only and Circular but, what does Machine Cycle represent?

Sorry Guys, Rookie NX programmer mistake! My "Motion Output" in the Machine Control Group was set to "Linear"

My post is in the notching mode (XZ) moves for cutting a radius. I have the following filled out on the "Circular Move" data definitions page: G94 G02 G90 X Z R F Also, on the machine tool page, I have checked "Output Circular Record" I would appreciate any ideas to help. Thanks.

Clearance Group in Programhttp://files.engineering.com/getfile.aspx?folder=25f65aed-c48b-4717-aa04-a8b4074f890b&file=NX_9_-_5.jpg

Departure Group in Programhttp://files.engineering.com/getfile.aspx?folder=306bc0de-e440-4c78-9d0a-c70af9275c5e&file=NX_9_-_4.jpg

Retract Pointhttp://files.engineering.com/getfile.aspx?folder=17e9e259-ab52-468a-829c-0d3a00884ce8&file=NX_9_-_3.jpg

Avoidance Grouphttp://files.engineering.com/getfile.aspx?folder=1616041f-61f5-4098-a981-d4afd2edbe5e&file=NX_9_-_2.jpg

Mark Rief: This is turning and I have installed the attached "Avoidance Group" in my program (attached). In the "AG", I have defined the Clearance (RT)=21.500 (attached). I have all of the machining operations defined in the "Non Cutting Moves" with the same "Clear Radial" in the Departure...

Markrief, The space didn't work.

Here's the error I'm getting.http://files.engineering.com/getfile.aspx?folder=e9ca6b10-2d6e-4240-a211-4c4986be4976&file=Format_Error_2016-04-20_12-49-36.jpg

Rick D. I can't seem to make this work. Please take a look at it.http://files.engineering.com/getfile.aspx?folder=c58a43b7-1851-499d-9493-f573345a272a&file=PB_CMD_prog_startSAV4.tcl

Rick D. Here's the error file from the above PB command file where I changed the DT.http://files.engineering.com/getfile.aspx?folder=0a451a77-b705-4e1f-8f98-dd987cdb6747&file=RSL4Post_Builder_Custom_Command_Error.jpg

Rick D. I tried changing the time format but I got an error. I'm new at NX PB, so could you take a look at the attached (2) files and correct my problems? Thanks Curtishttp://files.engineering.com/getfile.aspx?folder=de03ec46-955c-4433-9187-76ca87f1db09&file=PB_CMD_prog_start.tcl

Simple way to change the standard mom_date "APR 12, 2016" over to 04/12/2016? I'm trying to follow an example that I have but it doesn't seem to be working. Also, how to change the military time clock to regular time with AM & PM used?

Mark, I'm just trying to establish a clearance retract in each Departure Point (YC= 21.500) and call it a variable. I can then change this variable and it will take care of the retracts in all of my operations when my part Dia. changes. If I could assign a variable name, then I wouldn't have...