Hey Guys,
I'm putting together a presentation for Spin-On hydraulic filters and I wanted to get your input on advantages and disadvantages of using apin-on filters. just throw in anything you got. thanks guys!
VE1Bll, the amplifier is a factory installed one kind of like the bose systems but my car has a Rockford Fosgate system. so I don't know very much at all about the amp or even where to find info. I'm debating whether or not to just update the entire system with a new speakers and an amp to go...
Hi Guys,
So I installed a new head unit in my car the other day and now I get a pop out of the speakers when the head unit is powered off. I figure I can solve this by building a circuit that will let the voltage decay to zero of a second or two. There's is also a very slight pop when...
Hi Guys,
I'm having a bit of trouble with inventor studio animating some bolts. I have 15 instances of a filter assembly within another assembly. each filter assembly has 3 bolts in it, so 45 bolts in total. it seems when I animate one bolt the correlating bolt on the other 14 assemblies also...
okay, the light bulb went on about a half hour after I started this thread. for some reason it didn't occur to me to create the title blocks and save them within one of the template drawings (didn't eat my wheaties) Thanks for the responses guys!
Hi guys,
I want to create title blocks for various paper sizes and put them in the drawing resources/title blocks folder. I know how to create a new title block and have it in the drawing resources/title blocks folder of the drawing that it was created in, but I do not know how to permanently...
Yeah, its definitely steel. I attached some more photos in which i turned the flash on and you can see the color a bit better.http://files.engineering.com/getfile.aspx?folder=139a2b27-6b63-42fe-9237-f316ae69bfa0&file=IMG_1004[1].JPG
Hi guys, I got a part here for a hydraulic system on a Military vehicle, specifically a demister. it has what I believe to be a MIL spec coating on it. Its a dark brown/green color and is somewhat glossy. its definitely not paint either. I'll post a picture of it as soon as I can so you can...
Ok, thanks for all the help guys. I'm not too worried about anyone messing with a throttling valve since its for the pool at my house. what type of valve would work best for this application, My guess would be globe but I'm not sure I could get an 1-1/2" PVC globe valve for any reasonable...
ok, sounds better than buying electronics to me. only question now would be which end of the system would be better to have the flow control valve, suction or pressure side?
Hi Guys,
I got a Pentair Wwhisperflo in ground pool pump for free from a friend and mounted it up to my above ground pool. It filters great and has a pretty good turnover rate on the water but there is one issue, the motor is too powerful when it comes to hooking up the vacuum. Once the...
they've relied on friction to hold the can back for quite some time now and it hasn't been an issue. They just want to do a vibe test since the loosening torque is lower on this new design. I personally don't see any problems arising from it since its a fuel filter and shouldn't see much...
tbuelna, there is a shoulder on the can which lands on a face of the filter head. the contact there was designed to stop the rotation on the can after a specified amount of compression was achieved on the O-ring. there were issues with a previous design where over compression of the O-ring...
IR, I could see the o-ring being already compressed. we did a number of tests with two different cans and the numbers were right in the same ballpark for every test
yeah, we have a hard anodized coating on the billet can and bare threads on the filter head. the thread pitch is absolutely self locking as well. the fact that the loosening torque is lower than tightening is not necessarily a bad thing, I'm just curious as to the explanation.
