Hello all
Sorry I was not working for the holidays
Thank you again for the thread, I see it is not an easy problem, from what I understand the solution would be to insert features to delete bodies and supress those in different configurations and use those configurations in the different...
Jassco and Jboggs
I have not worked a lot with configurations and I don't know if you two are saying the same thing but if I work from the same part, I have a configuration with all my bodies and another configuration with some of those bodies, will the same body in the two configarations have...
Jassco,
I think what Jboggs ment for my application to generate another cut list with only selected bodies from a view instead of the overall cut list splitted into multiple pages. So for exemple I have a whole structure to draft my first cut list will have all the beams and plates, then on...
To answer both solutions: I could try hiding the rows, I often have cut lists of 80 parts or more so it may become a heavy task. As for faking it, I would guess it mean making my own table and filling it manually like you said there is a big risk of error and yes like you said the item 12 is...
Hello,
I do large weldment parts with multiple weldment cuts and I have a cut list at the beginning with all the bodies, then I do the drafting for individual parts in later pages, would it be possible to insert a cut list for a view on the current page that will only have the bodies that are...
It is in the center of the hole because if I don't ask the y axis to be oriented on my sketch line the function works fine. I also checked if my sketch line was in the plane perpendicular to my hole axis and everything is fine. I have tried on other holes with other sketches to test it out and...
Hello,
I am trying to put a bearing load in a hole of my part for a static simulation and I have followed the steps creating a coordinate system with the z axis coaxial with the hole axis but instead of the x or y axis being the default orientation I use one of the lines from a sketch I made to...
Hello all,
I can't find the ralation between the movement of 2 bars that go in opposite directions that I need to find for a mechanism. I need to find the distance that the bar B will travel if I pull from the hole on bar A (see image).
Thank you!
Hello,
In solidworks 2022 I am drafting and all my dimension's leaders underline the dimensions and I would prefer it wouldn't. In the NOTES in the document properties I put the leader display as bent and it fixed my problem but for the dimensions the only thing I can find would be to uncheck...
Hello,
I am making a weldment structure that has a lot of channels with the same distance between them (48in) I need to connect the channels to another beam with a plate so I made an extrude feature which solidworks recognizes in bonding box for my cut list as a plate in my 2D drawings. However...
jerry1423,
That would change my dimensions to fractions but I would like to keep my dimensions in decimal, it is only the thread callout that stays in fraction that I would like to switch
Hello, we have have migrated to the new NX 1953 and we have noticed that in draftings, when we use the hole callout for imperial threaded holes, the fraction for the thread is vertical wich makes it a lot smaller and harder to see when printing the drafting sheet. Does anybody know hoe to switch...
Yes that is what we were doing the journal works perfectly on that matter. We open the assembly in drawing mode, run the journal, it opens all the parts, then we run it again and it generates the pdf after that
