The link posted by SnTMan will get you started.
As discussed in that thread, it depends alot on stiffness of the bodies involved in contact.
Additionally, based on my experience -
Not a good idea to use steel for a bumper structure unless you have a very flexible concept in mind. You would want...
Additional to Kreysig, I would also recommend 'Numerical Methods for Engineers'- By Steven C. Chapra/ Raymond P Canale
A lot of engineers reach your situation. Its better to get that basic understanding of mathematics (atleast a feel for the concepts), when you use tools like Abaqus. Will help...
Again thanks everyone for your valuable time and input.
I have updated the shaft sealing concept. Added one more Radial seal on the other side of the bearing and provided provision to pressurize the space between the seals. 2 options -
1) Pressurize the chamber with lubricating fluid. Pressure...
Thanks for all the advises and opinions till now.
After initial round of info gathering and learning, I have come up with a rough plan for the concept.
Please find the attached PDF for some 3D illustrations of the concept.
Would be grateful for your review and comments.
As mentioned earlier...
Hi all,
Thanks again for the input.
Here is some general info.
Rotor diameter = ~ 1m to 1.5m
Water velocity = ~ 1.5m/sec to 2.5m/sec
Expected energy output = ~ 1 to 5kw
Depth of installation = ~1-2m below waterlevel
Artisi,
Couldn't find a suitable manufacturer yet. Most of them are experienced...
Hi all,
Thanks for the replies.
I am new here, so just getting used to the policies.
GregLocock,
You are right about the casing. Was thinking it will be easier to fabricate flanged ones. But yes, have to try the threaded coupling option as well.
MikeHalloran,
The plan is to install in a...
I am trying to build a submerged axial flow hydroturbine, but has only little experience with mechanical equipment building, and completely new to submerged equipment.
Will be grateful for your review/comments of the below concept and any answers for my questions.
Casing structure : The plan...
