I have Bystar 4KW 3000 x1500 and getting Z axis errors. Have check all mechanical aspects .Head goes up and down freely. Z drive LED suggest over current.
We have 4kw Bystar 3000 x 1500 machine .Has recently being serviced new out put coupler ,end mirror Bypos,all other optics/mirrors were cleaned beam alignment down .New ceramics and lens in cutting head.Have being cutting 3mm 304 SS using 5" head getting light burrs and can't seem to get it...
I have a Bystar 4KW 3015 laser and had servo drive fail 200 AMP 750RPM .I have replaced it twice over time with a used drive. I am reluctant to install the brand new one in case it fails due to problem down stream. Is there away of testing to see what caused the failure. Has anyone got any...
I have Bystar 4kw 3015 laser.When pulse piercing 16mm mild steel the pierce blows out then on other occasions it pierces fine on the same job. Have increased the pulse time to 18s.Any Ideas?
I have Bystar 3015 4kw machine and it has developed a clunking in the X axis.I slowed the rapid speed down from 40000 mm/mm to 19000 mm/m and it has gone,but makes cutting slow.I have checked all carrier rollers they are fine. I cleaned and check the rack and the pinion gear seem fine.Does...
I have Bystar 3015 4kw machine and it has developed a clunking in the X axis.I slowed the rapid speed down from 40000 mm/mm to 19000 mm/m and it has gone,but makes cutting slow.I have checked all carrier rollers they are fine. I cleaned and check the rack and the pinion gear seem fine.Does...
Hi ,
I have Bystar 3015 4kw laser. I have an air pressure message coming up on the HV unit .I have good air supply ,no leaks that I can find .I have checked the pressure on regulators on air supply unit and the regulators on the Resonator it is 6 bar.Any ideas?
Hi Krugtech,
I did find the fuses blown .Have changed them all is working now.I have not commissioned the machine yet I will get technician to do the final once over. I am trying to get as much done on my own.Next question when I turn the chiiler on ,on a hot day I get a high pressure alarm...
