Search results for query: *

Like you mentioned, there were no such valves on the internet. I couldn't find any. Unfortunately, I can't place the valve elsewhere other than the pipeline itself. I see a lot of replies talking about a pneumatic valve where the air intake is controlled by a solenoid valve. I start looking...

Thanks for your replies. I am talking about a solenoid valve as in on-off. Pipe size is half an inch external diameter, 1/4 inch internal diameter.

Hello all, I am working on a project where i need to control the flow of a hot Nitrogen line (300C) at a pressure of 7000 psi. I need to be able to control it electronically. However, i couldn't find a solenoid valve with these specifications. If someone knows a company that sells such valves...

@SnTMan, Thank you for your reply. It's not a constraint that my design should be ASME certified, but as you mentioned it's more of a good practice. I already designed my vessel using ASME Sec.VIII Div.1 . And i believe i will be using B16.11 for my cap design as proposed by @XL83NL. And yes...

Thank you for your reply XL83NL, Attached is the cross section view of my vessel(The threaded cap is the one on top). Wall thickness of 1.7 in, internal diameter of 1 in and a total height of around 8 in. The material is A514, and temperature can go up to 600F. (Please ignore the outer cover...

Hello all, I am working on a project where I need to design a pressure vessel (7000 psi). The vessel is to be closed from the top using a threaded cap (something like a bolt with a much wider head). I was told that there's an ASME code for such part. Anyone knows what is the full name of the...

Hello all, I am working on a project where I am designing a thick walled pressure vessel (7000 psi internal pressure) that is closed from the bottom and open from the top. The top is to be covered with a threaded cap (kind of a short bolt 3.8 inch diameter). I need help to design the thread. I...

Thanks a lot IdanPV, this was very helpful as the formulas conditions from UG-27 (2) didn't apply, but they do for the one's from the appendix.

Hello all, I am working on a project where I need to design a thick walled S.S 304 pressure vessel. I am using lame's equations, but I can't seem to find a proper ASME code for those equations. Can anybody help me out find that code. Or if there's any other code for thick pressure vessel design...