i am using carbon epoxy (T300/YH69) properties. I am attaching the material properties image, and yes i am using rigid impactor. I am considering a half plate which is subjected to multiple impact at some distances form the center of the plate, and on one side i am applying a Y-symmetry boundary...
i am performing a low velocity impact on a 32 layer [0/90] orientation of fiber . As we know the fiber tension failure starts form the bottom layers, but in my case the fiber tension damage starts at the top layers. what may be the reason. Please help me in this regard.
Hi, I am modelling a multi impact phenomena ( 5 impacts) on a composite plate with 8 layers. After running for three impacts the analysis is getting terminated by showing the error,
In element 379 of instance COMP-0-1 the ratio of deformation speed to wave speed is 0.30000 at increment 1751551...
hello sir, when testing a single element for validation how much displacement has to be applied. suppose I am taking a element of 0.5 mm x0.5 mm x 0.5 mm how much displacement has to be applied.
i am modelling low velocity impact on composite plate with 8 layers. To reduce the simulation time I am considering q quarter model with two symmetry boundary conditions in x and y directional and fixed in other side. I am using a rigid impactor with some mass and velocity, my doubt is should...
I am modelling dual impact or multi-impact on composite plate. How to model in Abaqus. I have model multi impact using VUMAT with two impactors and I have given predefined velocity to the two impactors. But I want to model in such a way that first impact should happen and then second impactor...
sir, i have done Abaqus standard analysis now i have 8 layers of campsite along with top and bottom frame how to import complete deformed model as we can import part only and also in explict step should we also apply again the boundary conditions and and preload pressure
I am modelling a composite laminate of 8 layers along with the frame on top and bottom. I am using VUMAt code and i am applying a predefined velocity in intial on the ball and applying pressure on top frame in step one. I need all my boundary conditions and pressure on the frame has to be...
