Search results for query: *

Sorry, I mean flexibles yes, stainless steel, 60 degree cone fittings. I'll check with my supplier, thank tou

It's all under ambient temperature, and you can hear the leak whistle. I should add that the vessel is weighted so it's all connected with stainless steel hoses, 60 degree cone fittings

Hello everyone, My company is working on a vessel that can work under pressure (around 3-5barg) and under vacuum (-0.5barg), So far the positive pressure tests were successful with no leaks or pressure drops, but during the vacuum test, the pressure rises really quickly, Is this normal? My...

It is continuous, it comes from venting at a certain section of the process, I don't have confirmation of the exact flowrate, a ballpark figure might be 50-100kg/h, A quill might work, it could be an option. Can't I use a sparger in a tank as long as I have enough residence time?

I've been reading a bit regarding the solubility of CO2 in brine, and it seems that it decreases as you increase the salt concentration due to the salting-out effect, So on the one hand, solubility should increase by increasing the pH, due to equilibrium, but the salting out effect cancels...

It doesn't have to be plain water no, we can add a base. Maybe a stirred tank with base dosage and a bubbling mechanism at the bottom would be a good method then.

Hi all, I'm trying to dissolve a reasonable amount of CO2 into water to form carbonic acid (so no gas trapped in the liquid at high pressure), I was thinking of using some sort of absorption column to have a continuous process where CO2 is dissolved into the water, but I don't know if that's...