Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Iqbal
  • Order by date
  1. Iqbal

    MAWP of a 2" schedule 40 NPT pipe

    The fitting is a metering device with the end that are 10mm wall thickness. The device is made form bar stock 316 stainless steel. The temperature rating fopr the device is -35 to 120 degrees celcius. The device is primary used for metering natural gas.
  2. Iqbal

    MAWP for 2" NPT schedule 40 pipe

    The material of construction is bar stock S 31603 stainless steel. The operating temperature is -35 to 120 degrees celsius.
  3. Iqbal

    MAWP for 2" NPT schedule 40 pipe

    The pipe is used for metering natural gas. Therefore, the inner diameter is fixed. The pipe nipple is an integral part of the primary metering device. I am unsure of the thickness between the root of the thread and the pipe.
  4. Iqbal

    MAWP for 2" NPT schedule 40 pipe

    Hi, I am looking for a standard for MAWP for threaded pipe; a methoed of calculating this would be great.
  5. Iqbal

    MAWP of a 2" schedule 40 NPT pipe

    Hi, I am looking for a standard for MAWP for threaded pipe. A methoed of calculating this pressure would be great also.
  6. Iqbal

    C automatic documentation

    TedT:<br><br>I have found a lot of free information and compilers at:<br><br><A HREF="http://www.gnu.org/" TARGET="_new">http://www.gnu.org/</A><br><br>check it out!<br><br>Iqbal Lakhani C.E.T.<br>
  7. Iqbal

    Looking for VFD with some Programmable I/O

    Baker Hughes-Centrilift manufactures a VFD that can be operated both in PWM and six step mode. The VFD is known as the GCS. This drive has built in PLC capabilities. The unit has some on board I/O and an expansion I/O module. If you want more information, I may be able to obtain a manual for...
  8. Iqbal

    PC Card Design

    I am attempting to interface a PC(AT) card to a bus using a motorola 68hc16z microcontroller. The PCMCIA PC card AT specifications require that we have a delay between asserting the card select and putting the address on the bus.(address setup time) secondly, there is a 20nS time delay required...

Part and Inventory Search

Back
Top Bottom