Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. xchnauzer

    Classified Location Question

    The immediate area around the vessel should also be classified, albeit a different classification level. Consult relevant standards for more information.
  2. xchnauzer

    Gas consumption curve for 10MVA Gas Turbine Generators

    Hi all, I'm trying to do a justification for building a new power plant and need to do a TCO comparison between the existing plant a new one. To do this, i need to have a curve that shows the gas consumption at different loads for a 10MVA gas generator, specifically a Solar Mars 100...
  3. xchnauzer

    Underground cable identification

    Thanks Scotty. I'll try it out.
  4. xchnauzer

    Underground cable identification

    We have a suspected cable fault in one of our facilities. We have isolated both ends of the cable but the cable route is not known. We have excavated a joint on a cable which is suspected to be the same one but there is no way to confirm before working on the joint. We have also tried to use a...
  5. xchnauzer

    Power factor measurement.

    We have two TB5400 units in our facility. Each unit has a meter that displays the power factor and load in MW. While the load calculations in the facility is done using 0.8pf, I noticed that the pf readings for the two turbines are 0.8 and 0.9 respectively. Does anyone know why this is? How do...
  6. xchnauzer

    "zero" converts to blank!

    Just discovered what code will give the required number format. Shahyar, you could right-click on the cells you want to format, click format cells, on the number tab, select custom, select a number format close enough and ensure that you specify the style you want (or nothing) after the second...
  7. xchnauzer

    "zero" converts to blank!

    Configurator, Could you suggest the code that would perform this task - represent zeros as blanks and vice-versa.
  8. xchnauzer

    MS Project Software Recommendation

    I expect that MS Project should recalculate / or reschedule the project once the work rate has been defined. An open source alternative you may want to consider is the open Workbench which will do almost everything MS project will do. It can be downloaded free at www.openworkbench.org. You can...
  9. xchnauzer

    Excel runs slowly on computer

    Consider changing the auto recalc option in excel to manual.

Part and Inventory Search

Back
Top