D23 , I would like to thank you a lot for your help , because you gave me good information.
I know I bothered you alot , but in case u have any PDF files regarding the calculationS of pumping test or any good information , especifically the mathmatical examples , that can help in assumption and...
EGT01 , Thanks alot
Thats what I need to know , the pumping test should be at full design rate or greater.
Some Engineers answered me that I can depend on the 60m3/hr pumping test if its operated long enough to obtain a stable fluid level, and other said that you might be able to estimate...
The test is operated long enough and they obtained stable fluid level , abouit 48 hours . So u think the data is enough to uggest the 200m3/hr capacity pump ?
All,
I have a new project at which we have to install a vertical turbine line shaft pump for deep water well , the design condition for pump is : 450m head and 200m3/hr capacity . The well is drilled before two months , the contractor who driiled the well performed a pumping test at 60m3/hr...
All,
I have a new project at which we have to install a vertical turbine line shaft pump for deep water well , the design condition for pump is : 450m head and 200m3/hr capacity . The well is drilled before two months , the contractor who driiled the well performed a pumping test at 60m3/hr...
Horizontal booster pumps and vertical submersible pumps are planned to be stored for two years in warehouses , what type of maintenance or what we have to do to protect them during the storage period ?
All ,
In a water project we have some pump control valves, pressure relief valves and butterfly valves,The project was suspended for 1 1/2 year, all valves were bought and stored in warehouse, What type of maintenance do we need to apply to protect the valves during the storage period , is...
My company bought some horizontal booster pumps with two submersible well pumps to be installed in a water project. Due to some reasons the project was suspended for one year , all pumps are already stored in warehouses , Please , I need to know what type of maintenance or how we have to...
My company bought some KSB horizontal booster pumps with two Centrilift submersible well pumps to be installed in a water project. Due to some reasons the project was suspended for one year , all pumps are already stored in warehouses , Please , I need to know what type of maintenance or how we...
All ,
My company has bought some Carrier AC units to be installaed in our project. Unfortunatilly the project is suspended for one year . All AC units were bought and stored at warehouse, During this one year of suspention and storage of equipment do we need to do any type of maintenance for...
I am working in water project at which BA-U Tesnit gasket is approved,this material is asbestos-free. after checking the delivered material I observed that some of the gaskets are Tesnit kemit super, which is asbestos gasket, I am planning to reject them, but I need to know alittle about the...
Hi guys,
does any one of you have datasheet or any information about the vibration limit for KSB horizontal pumps - multitec type C.
Thanks for your help
For air piping application after the air receiver tank, 2" ss check valves will be installed. I think we are going to select UN3 type from CHECKALL VALVES manufacturer.in the manufacturer datasheets it was shown some values for the spring cracking pressure and standard cracking pressure, the...
If butterfly valve will be installed inside manhole, what is the best coating for this application to protect the valve from corrosion,do we need to paint this valve with epoxy as I think the humidity inside chamber is very high so can we consider it like submerged application or we can consider...
If butterfly valve will be installed inside manhole, what is the best coating for this application to protect the valve from corrosion,do we need to paint this valve with epoxy as I think the humidity inside chamber is very high so can we consider it like submerged application or we can consider...