Yeah this is what I've done but to compare catia to solidwork, in solidwork you can work with the side sketch of the hole and move the lenght to the tip, this is what I was searching for.
Hi,
Is there a way to set the depth from the tip of a 120 deg ended-hole?
When you machined something, you set the tool offset from the tips and not after the taper section so...
Yep, Styrene. A crystal 4.0 of melt flow grade.
Here is a link for the pic.
http://www.cnczone.com/forums/attachment.php?attachmentid=41175&d=1185219195
Hes aiming a sport bottle so it's surely not a SP-400 thread. SP-400 are mainly for pills bottle, sauce bottle and so on. A sport bottle for me is a bottle that can be opened in a quarter turn of the cap.
Ok guyz, I've found what's wrong. I don't know why the main body was set on another layer but putting "none" in properties/graphic; layer was the solution.
I have a complete assembly that I made with some model is invisible. Even when I open the part itself, nothing is visible! Even in the hide/show toggle mode! I cannot see any plan also! But in my assembly, many other part are ok.
Someone know what could be happened? I need to recover this parts...
I'm working on a hot runner prototype for our injection-blow molding process and now I must find a way to make nozzles that will not drool or at least, that will reduce it. And we cannot use shutoff nozzle.
With my experience, I saw that if the nozzle have an angle gate, it tend to reduce...