Thats very interesting. A lot of helpful information provided by everyone. I will have to look into this option as well. I realize this thread has become quite lengthy (which is a good thing), so thank you for those who continue to take the time to read through the discussions and provide input...
Yes, we have covered all of that.
In my last post I just wanted to see if I could calculate on my own how many watts would be required to operate the equipment to size the generator.
It's single phase electric. One of our operators gave me the 45.6 number. He may have totaled the # from the...
Ok thanks, great links guys I will be looking into those.
Im trying to go over the generator requirements based on the data I have.
So if watts = (amps * volts) * load factor
Then, I would be at (45.6 * 240) * .8 = 8.755 kW
Is this correct? Would that for general operating? And I would need...
That sounds like a good idea itsmoked.
Anyone have any recommendations for type of PLC I would need? Would it be one like this: http://web6.automationdirect.com/adc/Shopping/Catalog/PLC_Hardware/DirectLogic_05/PLC_Units/D0-05DR-D
Thanks again for everyones comments.
I dont have a background with electrical details, so thats why I thought I would talk to you guys for your expertise on the subject.
Ideally, you would want to keep the setup as simple as possible. I did see where some generators have packages w/ transfer...
Yea I was thinking portable in size and would mount it down. This would be installed on site with a PLC and automatic transfer switch. We could probably use the PLC to delay the auto transfer back to primary as well so the generator doesn't just have to run for 5 minutes. Maybe let the backup...
I figured we could stagger start each motor with about a 15 or 20 second delay like you mention by using the PLC.
Im researching generators... It looks like some come with transfer switches, but they're manual type. Hopefully a portable size generator will work. I don't know if you can post...
Thanks for all of the discussion. Unfortunately connecting to the natural gas compressor would not be an option.
I believe I've got a pretty good starting point now to evaluate the options available. If the thread remains open, I'll try to post back what the final setup turns out to be.
Hey thanks for the replies.
This is a natural gas compression site. We can utilize the natural gas to power any generators.
The amine facility removes H2S, CO2 and other contaminants from the gas stream. It is important to keep this running. The agressive storm season has brought a touch of...
Ok thanks for the info. Your answer leads me to a few questions:
What is a PLC, and typically what size of generator would be required to provide the power requirements? Is there a good website or rule of thumb to go by?
That's the core of my question. What are my options in your levels of electrical expertise? Use a natural gas powered electric generator? Is there a form of battery backup available out there (that would fit this application)?
The equipment is an amine processing plant. There are 4 total...
I assume this equipment can't get wet? I'm not sure if it's applicable to field conditions, and may apply more to computer equipment.
Maybe I can set something like this up in some sort of a meter house. Any additional thoughts?
I forgot to mention its 12 HP @ 45.6 amps, which includes surge...
I have what could be a quite basic question for you electrical guru's. I have some equipment that is in a rural area. During the storm seasons, intermittent power outages can occur. This causes the equipment to shut down, and must be manually turned back on.
My first thought was to get a...
