Search results for query: *

Hi: Am looking for a solvent or adhsive to glue two injection molded HIPS together with a solid joint. Would appreciate some suggesitons. Thanks Gins

Is there any chance that the part could be stress relieved after molding perhaps in a fixture?? Gins

Demon3 The part is symetrical and the gate is in the center the gate dia is about .350 dia at the part. We have tried engage santoprene etc. The thin ring I mentioned is 0.020 thick and is a semi circle in cross section to provide for a longer stroke. The center section is 0.080 and it has a...

We are trying to mold a flexible diaphram approx 4 inches in dia with a thin wall 1/2 inch in from the edge. The thin area (ring) is about 1/4 inch wide. The center is .080 thick and the gate is in the center. We have tried engage and several other flexible materials but the part is very...

Thanks for all your interest and help was able to get the project working with some high voltage relays from Crydom. Many thanks Gins

I want to find a relay that ideally is normally closed (but could live with normally open) that would switch a 310 rms VAC 650 HZ at about 1A. The switching frequency is variable from 5 to 20 per second. This is to control an electoluminesent light off on demand. Am rather stumped. Help...

I want to find a relay that ideally is normally closed (but could live with normally open) that would switch a 350 VAC 650 HZ at about 1A. This is to control an electoluminesent light off on demand. Am rather stumped. Help would be appreciated. Regards: Gins