Hello
I need a low-power (about 0,37 Kw) triphasic 230V (50 or 60 HZ) pump for hot water.
The water temperature is about 85-110º.
It is not possible to get this in Europe.
Is possible to get them in other markets?
Regards.
http://todoproductividad.blogspot.com/
The complete process is a superficial treatment line where the steel pieces are passed through different liquid solutions for improving their finish. The tank that we are talking about is the final step in the process and the pieces are washed with hot water. Currently it has a very efficient...
- The specific heat of the object is 460 J/(Kg ºK)
- The number of pieces is 4.6 per h.
- The standby loss of the tank is 339 w.
Thanks
http://todoproductividad.blogspot.com/
Hello.
I want to know which one is the most interesting equipment for the following industrial process, please:
We need to heat a 6000 liters water tank up to 90ºC (194ºF).
200 kg pieces are introduced to the tank (with thermal insulation) for a degreasing process.
The temperature must be...
Yes, that is the solution, thanks.
How I can get the load does not absorb energy in the moments that I did not exceed the limits?
http://todoproductividad.blogspot.com/
I need to regulate the energy produced by photovoltaic panels but not convert the voltage.
The DC voltage data are:
Vco = 315 v
How I can do?
thanks
http://todoproductividad.blogspot.com/
I'm working with a DC bus where I want to feed the 600 V, which is part of an electronic circuit downstream. The load is adapted to the power output of the voltage source.
Thanks
http://todoproductividad.blogspot.com/
- It is a circuit supply where varies the current and voltage (the voltage is approximately 637 V but has variations over time).
- The current is about 1.06 A, with small variations in time
- The load requires that V = 600.
http://todoproductividad.blogspot.com/
I need to stabilize a DC current of 600 V. It's a circuit that generates a DC current in amperes and current unstable. The current is 60 A How could stabilize the current?
http://todoproductividad.blogspot.com/
Good morning.
I'm looking for Smart Energy Distribution Management System having the following characteristics.
- Easy distribution.
- Able to plan ways to distribute the energy up to 100 circuits.
- The power to distribute is 60 kw.
- The power distribution should be done by:
* To limit...
The depth of discharge is low in the SAI. I think we need many items.
Is not it better to use lead acid batteries with high discharge depth?
Thanks
http://todoproductividad.blogspot.com/
The aim is to take advantage of a power not used in the generator to load batteries.
The problem is that it is a lot of power the generated one. We would need banks of batteries and a suitable system of load.
This it is the problem.
I do not know if the problem is understood well
Thanks
Hi
I need to load banks of batteries OPZS (850 Ah c100) with one diesel generator of 60 kW.
The time of load foreseen is 6 hours a day.
Can someone recommend to me the most suitable system of load?
Thanks
