Search results for query: *

Here's some more: Good luck Jburgesss. :9001 (0.125 ACRYLIC W/PAPER) (USE AIR OR N2) (STANDARD FOCUS) (0.077 NOZZLE) G82P250Q200R100M69 G88P1M58 G87P0 M32 M20 M22 G04X0.1 G82P250Q500R100M69F100.0(200.0) G88P1M58 G87P0 G04X0.5 M99 :9002 (0.035 SS W/O2 SLOW) (STANDARD FOCUS) (0.077...

Hope this helps: These are ones Mazak hands out with machines. Mine is a 4KW so I havn't used these. Have more for alum and stainless if you need them. :9044 (0.035 CRS SLOW) (STANDARD FOCUS) (0.062 NOZZLE) G82P1000Q200R30M69 G88P20M56 G87P0 M32 M20 M22 G04X0.2 G82P1000Q500R25M69F40.0...

Hi wakobav I bought my first laser about 1-1/2 ago. So many choices- what brand, what size table, how much power, what kind of resonator? Mine was a replacement for a punch plasma, so I stayed with the same size (4 x 8). I went with a 4kw for piercing quickly, and the ability to cut thicker...

travismac- Hope this helps: from a spicer chart series width cap max angle continous Short duration Dia lb-ft lb-ft 1310 3-7/32 1-1/16 30 130 800 1330 3-5/8 1-1/16 20 150 890...

76GMC1500 I saw american hotrod, but the rear end in the '56 had a drop out center section, I thought maybe a 9" ford in a custom setup? The inboard disc brakes would reduce the unsprung weight at the wheel. Back to driveline brakes. With large tires (16r20) it is difficult to get parking...

Travismac- I used to have a model t ford with transmission brake. It got really exciting on ice. I have also seen Driveshaft brakes used for parking brakes on many trucks from the factory. In Arizona drivehaft brakes are not legal for service brakes, we get hasseled for them on our rockwell...

Bob- Are using system variable #3012 ? it should give you the time in 24 hour format HHMMSS 4:12:32 PM would return 161232 Variable #3011 should give you the current date YYYYMMDD Hope this helps JBurgess

I run mazak fh4800 40 taper machines. The cabinets on these are like giant speaker. Place a 12" square piece of dynamat (available at stereo shops) in the middle of cabinet panel that you can. I have found that cutters with asymmetrical teeth produce much less pronounced vibration. After...

Roy, P is power Q is frequency R is duty cycle in % F is feed rate J Burgess

Roy try this (0.105 CRS STP F190) ( 5.0INCH NOZZLE=0.05IN NF-.04) G88P5M56 M20 G87P30 M32 G82P1800Q100R20 G87P5 M22 G04X0.7 G88P30M56 G82P1300Q100R100F190 G87P0 M99

Harvey- here are some cutting programs for 3/8 and 1/2" steel. Sheet heating is a major problem so stagger the order of your parts across the sheet. If you would like more cut conditions, post your e-mail and I will send a file to you. Good Luck (0.375 HRS FAST) (STANDARD FOCUS) (0.077...

Roy- P is power in watts Q is the frequency R is the duty cycle in % f is the feed rate Good luck

Would a delta or wye motor provide for better voltage stability in a rotory phase converter in the 25 hp. range? I realize an AC-DC-AC inverter would be best, but not cost effective. Thanks for your input.

In the 70's there was a truck on the show circuit with a gyroscope out of small ship mounted on a gimble in the bed. it could lift the front of the truck off the ground sitting still. The ships use the gyros to keep panengers from getting sea sick. It would certanly prevent the body from...

I form simular parts using a hose crinping machine with dies cut to a hex. Of course this only works if you are doing a lot of short sections. 1-1/8 is probably on the small size to use an expanding die, but it would give a smaller radius in the corners.

Does anyone have experience with shop data systems software on a punch/plasma?

Does anyone have experience with radan laser software? Would you recomend it?

It would be material that is hardened from the mill. I use 41L40 bar that is 28-32 rc. It machines well for me. In a lathe I can cut .200 depth of cut, .022 per revelution at 600 surface feet. I get a life of about 150 parts per insert.