Search results for query: *

I have a problem with controlling a small flow in a pilot plant and would appreciate any suggestion. System consists of two horizontal drums D-1 and D-3. There is 0.4 gpm flow from D-1 to D-3 under gravity. Bottom of D-1 is 500 mm above top of D-3. There is an orifice meter to measure the flow...

Thanks AggieCHENO4for the info.

I have a problem with controlling a small flow in a pilot plant and would appreciate any suggestion. System consists of two horizontal drums D-1 and D-3. There is 0.4 gpm flow from D-1 to D-3 under gravity. Bottom of D-1 is 500 mm above top of D-3. There is an orifice meter to measure the flow...

Would appreciate any input regarding use of BXM type vapor condenser with sub-cooling. Vapor is on shell side, cooling water on tube side. Are there cross baffles used in a BXM exchanger? What is the best way to ensure sub-cooling - seal in the outlet line, dam baffle or a valve in the outlet...

SNORGY: Thank you for your tip.

Is flame arrester in a vent line from a vessel considered blocked because of fouling so that a relief valve is needed to protect the vessel from over pressure? If the vapor has water and the flame arrester is not heat traced should the flame arrester be considered blocked due to ice formation...