2012 Sheet Metal and Service Pack

[kellnerp]

I have a sheet metal part saved on Windows 7, SW2012 SP1 64 bit. When I try to open it on Windows 7, SW2012 SP0 32bit, I get an error and the file won't read in. This only happens with sheet metal parts. Has anybody had this exact same problem between both service packs and 64/32 bit? It will of course open on the 64 bit machine.

The VAR says this shouldn't happen.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

http://www.linkedin.com/in/engineeringtransport

Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."

 

[CorBlimeyLimey]

I was also under the impression that a SW file should not be affected by SPs, 32/64 bit editions, nor even Windows version.

Does this happen with all parts, or just this SM part.

Can you post it or similar for testing on my XP x32 system?

 

[kellnerp]

VAR is looking at files. Just looking to see if others have had the problem. Thanks.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

http://www.linkedin.com/in/engineeringtransport

Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."