25Cr Galling Threshold Stress

[SteveyB]

Hi,

I was wondering if anyone could advise on the galling resistance of 25cr (UNS S32760) on 25Cr. I have has a good search on the Internet and Iam struggling to find any info on its resistance to galling in machine cut threaded components.

 

[EdStainless]

Other than it is low/
Go to Outokumpu and search the professional tools on the web site. They may have galling data.
I'll ask one of them tomorrow (I am at NACE).

= = = = = = = = = = = = = = = = = = = =
Plymouth Tube

 

[SJones]

Posted on too many forums. Please stick to one forum.

Steve Jones
Materials & Corrosion Engineer

http://www.linkedin.com/pub/8/83b/b04

All answers are personal opinions only and are in no way connected with any employer.

 

[SteveyB]

Thanks guys the info is great. I do apologise for the multiple posts I did it that way to promote more feedback thinking that people generally stick to their preferred forums.

 

[MikeHalloran]

The people who will bother to answer you, have _many_ preferred forums.

Oh. I'd be inclined to use lots of Never-Seez, regardless.



Mike Halloran
Pembroke Pines, FL, USA