Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

2D transparency problem

Status
Not open for further replies.

cemunal2000

Mechanical
Jan 5, 2016
13
DE
Hello;
In CatiaV5 in assembly design (Catproduct), I have some catparts with 100% transparency and some parts with 50% transparency.
In 2d (Catdrawing), I want to have a front-view respecting transparency level in 3D.
Unfortunately all parts are shown with 100% transparency.
How can I sort it out?
Thank you
 
Replies continue below

Recommended for you

Hi cemunal2000,
I don't understand what you mean by applying transparency in 2D.If you want to hide some parts you can right click the view...go to overload properties..then choose the filter options for hide/show of the respective parts.
You can also go for a break out view for showing the hidden parts.
I can help you if you can describe your requirement.
 
3 Catparts with different Opacity levels in a Catproduct (Assembly Design).
1) 100% opacity 2)50% opacity 3) 25% opacity
In Catdrawing When ı get a front-view I want each part to be shown according to its opacity. (Sharp or Obscure, less obscure etc..). But it doesn't.
How can I do that?
 
change view projection to raster mode

Eric N.
indocti discant et ament meminisse periti
 
view properties

Eric N.
indocti discant et ament meminisse periti
 
Like Eric said;

Go to the view Properites....

1. change Dress-Up options and turn-on 3D COLORS
2. scroll down to View Generation Mode and change EXACT to RASTER
3. then change Options to SHADING WITH EDGES
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top