Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations pierreick on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

3 Output Differential

Status
Not open for further replies.

Rama Vadapalli

Mechanical
Jan 9, 2019
1
Does anyone know if there are any 3 Output Differentials with an output ratio of 1/3 available? I designed one, trying to verify if mine is the first design. I have seen designs for output ratios of 50:25:25, but haven't come across any that distribute power equally.

Please let me know if any of you have come across such design. I would also like to know any possible uses for it. If you know of any, please let me know.

Thank You.
 
Replies continue below

Recommended for you

One planetary gearset with a ring gear having twice the teeth of the sun gear. Input is to the planet carrier, one of the outputs is from the sun gear (which takes one-third of the input torque). Ring gear (which takes two-thirds of the input torque) drives a conventional differential that splits the remaining torque in two.

Planetary differentials or torque-splitting devices are not new.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor