Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

30 ton, single phase chiller

Status
Not open for further replies.

ontheqt

Mechanical
Aug 23, 2002
8
Does anyone know of a 30 chiller solution that will operate on single phase power? Would really like to avoid a cooling tower too. Seems like the air cooled chillers available all need three phase power in this capacity range.

We were thinking an indoor bank of 5 ton compressors with chiller barrel each with a remote outdoor air cooled condenser.

Looked at absorption chillers but the 0.5 COP and need for a cooling tower would have to be a last resort for us.

thanks!
 
Replies continue below

Recommended for you

30 tons on single phase sound like a big residence. The attached company makes chillers for residential applications. They offer a single phase 5 ton that you can manifold. I think you will dim the lights for blocks if they all start at once.
 
The service in the building is 800 amp, single phase.....lol,lol. I know but that is all that is available. Since the post went up we sourced a 10 ton (two 5 ton scrolls) Trane, air cooled so times three!

thanks
 
We had an application just like this. 30 tons of cooling. We used 6 - 5 ton Unico chillers for a student residence since there was no 3 phase power on the street. Trane can supply a single phase 10 ton scroll machine. Phase converters are probably too much hassle for such a small load.

Cvanoverbeke
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor