Nov 12, 2001 #1 masi Mechanical Nov 12, 2001 1 Can we use 310 SS material for a hydrocarbon gas with 8% CO2 and 8% H2S and 2% H2O. Gas temp: 80 degree C. Thanks.
Can we use 310 SS material for a hydrocarbon gas with 8% CO2 and 8% H2S and 2% H2O. Gas temp: 80 degree C. Thanks.
Nov 19, 2001 1 #2 rustbuster Petroleum Jul 7, 1999 289 If your water dew point is below 80C Carbon steel should be suitable. Unsure of your application, if corrosion is an issue, 304 or 316 grades should be suitable at that temperature. 310 is typically utilized in higher temperature applications. Regards Upvote 0 Downvote
If your water dew point is below 80C Carbon steel should be suitable. Unsure of your application, if corrosion is an issue, 304 or 316 grades should be suitable at that temperature. 310 is typically utilized in higher temperature applications. Regards
