Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

32"GLOBE ALVE

Status
Not open for further replies.
DEEPBLUE76

DEEPBLUE76

Mechanical
Jul 2, 2002
10
I NEED 32"GLOBE VALVE DIMENSIONS MOTOR OPERATED DIMENSIONS OR A CATALOGUE CAN ANYBODY HELP ME
 
Replies continue below

Recommended for you

Sort by date Sort by votes
WHOAA ...32"! Boy that's painful!!! Can you step it down to a 30", it'll be a little bit more readily available!?? But your still going to be paying thru the nose on that one. As far as dimension ...at that size, it’s per manufacturer. Good Luck! ...Mark
 
Upvote 0 Downvote
Give me a call, I'll be happy to help you...
(414) 906-0194

David
-Lakeshore Technical
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Larbye
  • Locked
  • Question
Best practice for installation of stop check globe valves
Replies
4
Views
196
Larbye
Larbye
Piper Mike
  • Locked
  • Question
24" Pipe Attached Directly to 10" Fired Heater Outlet Nozzle
Replies
4
Views
150
Piper Mike
Piper Mike
PagoMitch
  • Locked
  • Question
Removal of rust inside improperly stored 6" steel piping 1
Replies
16
Views
248
PagoMitch
PagoMitch
thermmech
  • Locked
  • Question
Steam tracing effectiveness on 40" acid gas line
Replies
7
Views
233
Dhurjati Sen
Dhurjati Sen
Eng-firm
  • Locked
  • Question
The IMC allows the use of "converte
Replies
4
Views
119
GBTorpenhow
GBTorpenhow

Part and Inventory Search

Sponsor

Back
Top Bottom