3D section view

[radohric]

Hello there

i would love to know if its possible to make 3D (isometric) section view like in the picture bellow (or this link :

https://d2t1xqejof9utc.cloudfront.net/pictures/files/15422/large.png?1351275068

). nothing working im still trying...
i work on NX 7.5.4.4
can NX possibel make these views?

ps: dont know why but my f1 dont work propertly. so i cant use the help for it
please HELP ME !!!!

 

[JohnRBaker]

Not a problem. Just go to...

Start -> PMI

...and then toggle ON the PMI toolbar and select the first icon titled 'Section View'. You will need to create a sketch representing the portion of the model which you wish to remove. In order to actually see an image like you've shown, you will next have to enter the 'Static Wireframe' display mode and toggle on Invisble Hidden Lines, and you'll get an image like:

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.