Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

5 speed manual noise

Status
Not open for further replies.

mosgerila

Electrical
Mar 19, 2007
1
I have a HUMMER H3 2007 .......5 speed manual transmission .only 700 mile on itt ................when i shift 1st shift into 2-nd (btw 2500rpm-3000rpm) making a noise like vibrating some pice of metal or something and it's happening the same thing btw 2-nd----and 3-rd shift (btw 2500 rpm --3000rpm).........btw 3rd-4th..shift.............and 4th-5th shift i don't hear any sound .......i .put in neutral and i accelerate 4000-5000rpm the engine sound it's ok ..only happening when i drive ............................i'm very upset ............anybody knows anything about this problem
 
Replies continue below

Recommended for you

No, but I'd have thought there were a lot of Chevrolet Colorados out there that would share the problem. Try their user forums.

Cheers

Greg Locock

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips.
 

A 2007 with 700 miles? It doesn't sound like you pounded on the dealer yet.



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor