6 inch flanged body valve radiography with ir-192

[kamal62]

What's the best SDF and source angle to make a radiography of the drilled holes flange of 6 inch body flanged valve
with ir-192 with the minimum image distortion of the holes.
Thanks so much the answer will be a great help.

Kamal62

 

[DekDee]

kamal62,
The most important information you haven't given us is what you are actually looking for ?
Regards,
DD

 

[DeleteriousPhases]

That's going to be a hard shot to get. I'd consult a lvl 2 or 3 radiographer. I'm sure one works at your local inspection company. Source a few and get their opinions over the phone.