I have AUTOCAD LT 2000 and recently purchased a 64 bit machine. The salesman told me that Vista can be made to ask how to run the program when it is installed. Big news, Vista doesn't ask and the computer tells me that the program isn't compatible. Is it time to move on?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
64 BIT MACHINE
- Thread starter Dtuck
- Start date
TCARPENTER1
Computer
- Sep 22, 2005
- 234
- 0
- 0
Hi Dtuck,
I agree, it's definitely time to move on, however, if you need to confinue with LT2000, you can try this:
[ul]
[li]Right click on the acadlt executable file.[/li]
[li]Select the "Properties" option in the popup.[/li]
[li]Then, select the "Compatibility" tab and set the compatibility mode.[/li]
[/ul]
You may have to experiment a bit and in the end, it may not work, but it's worth a shot.
HTH
Todd
I agree, it's definitely time to move on, however, if you need to confinue with LT2000, you can try this:
[ul]
[li]Right click on the acadlt executable file.[/li]
[li]Select the "Properties" option in the popup.[/li]
[li]Then, select the "Compatibility" tab and set the compatibility mode.[/li]
[/ul]
You may have to experiment a bit and in the end, it may not work, but it's worth a shot.
HTH
Todd
- Status
