Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

72 inch flapgate

Status
Not open for further replies.

cvg

Civil/Environmental
Dec 16, 1999
6,868
I am looking for information for size, cost etc. for a 72 inch flapgate to be installed on a storm drain outfall which will prevent high flows in the river from backing up into the project site. Waterman seems to be out of business from time to time. Any idea of other manufacturers?
 
Replies continue below

Recommended for you

cvg,

The RED valve company has a TIDEFLEX checkvalve that might fit your application. It is not a swing check design, but it is a fabricated rubber 'duckbill' that is opened by flow and closes against reverse flow.
 
thanks! I'll check that out
 
RED Valve Tideflex is the most reliable device

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor