I am currently working on a 800KV HVDC transmission line project. We have a couple of converter stations at the sending end (about 10km apart between each other). All the lines for them will eventually stay nearby to be built in the channel. I'd like to know whether there are any standard requirements for these distances, between the converting stations and between the transmission lines? Any input is appreciated.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
800KV HVDC Converter and Line Distance
- Thread starter jliu1
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question