Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A typical-general "stress report contents"

Status
Not open for further replies.

S. Kuderu

New member
Feb 13, 2011
5
DE
• Sample stress report contents
o Title contents
 report title, method, author, material, parts, main reference, date, approver, checker, customer name, brief description of the report, software’s used etc…
o Table of contents
o References
o List of symbols and acronyms
o Measurements and units
o List of tables
o List of figures
o List of equations
o Revision details
 Introduction/scope of the work
 Result summary and report conclusions
 Inputs used, geometry, loads etc…
 Materials and allowables
 Calculation methodologies
• assumptions
• stress criteria
• basis for calculations
• FE models
• loads and boundary conditions
• load case descriptions
• sample calculations
 calculation results in details
• Special plots, tables, graphs etc...
• Conclusions in each section if the analysis is done for assemblies
o Appendix
 FE files and load case details
 special methods used from any standard references
 additional plots, tables and calculations etc..

Keep post your comments if I miss some important topic or if you have any new things to add to the list?

cheers
shivukuderu
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top