Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

A105N+Stellite

Status
Not open for further replies.
MoReSo

MoReSo

Mechanical
Apr 16, 2013
21
Hello,

I'm wondering if A105N+Stellite is acceptable for low temp sour service SEAT? I have two drawings one is LF2/STL and the other one is F316/STL for seat. IS A105N/STL is an acceptable substitution?
please advise.

MRSohrabi;
Materials and Welding Eng.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
If -50F design, A-105N will not meet the impact toughness requirements of ASME B31.3 or ASME VIII. A-350-LF2 should be used.
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top Bottom