Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

A529-50 or A992-50 for bending

Status
Not open for further replies.
Solidjnke

Solidjnke

Mechanical
Oct 24, 2004
21
0
0
US
I want to bend some I-beams_(cold), and these are the two types of material I have to choose from. Can someone point me in the right direction for information on which material will be able to take the abuse the best without "cracking"?
 
Status
Not open for further replies.

Similar threads

Leosaldanha
  • Locked
  • Question
Special cars loaders for metal silicon furnace operations
Replies
0
Views
17
Leosaldanha
Leosaldanha
Anders74
  • Locked
  • Question
Need examples of welded products that maintain airtight/hermetic seal for 15+ years
Replies
6
Views
34
itsmoked
itsmoked
Helepolis
  • Locked
  • Question
Biomedical Oriented "Air" Components Manufacturer (Pistons, pumps, valves etc.) 1
Replies
1
Views
26
IRstuff
IRstuff
Framingguy
  • Locked
  • Question
Looking for a particular corner key
Replies
0
Views
9
Framingguy
Framingguy
zmazim
  • Locked
  • Question
Certification Requirements for Handling Equipment
Replies
2
Views
19
chelseap
chelseap
Back
Top