Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

AAS in Drafting and AAS in Mechanical engineering

Status
Not open for further replies.

zyzz

Mechanical
Dec 31, 2013
3
what kind of doors would an AAS in Mechanical engineering open up or provide
 
Replies continue below

Recommended for you

Depends on the particular job you are applying for.

For example, if you have an AS in engineering, but you also are proficient at doing class A quality auto body surfacing in CATIA V5, you can easily get contract work that pays $75 to $100 per hour. But if you have an AS in facility planning, you will be lucky to get a job paying $30K.

Any doors that open for you will be due to demand for skills that you have. Forget everything that your college advisers told you about career opportunities. Instead, learn a specific skill that is difficult to master, like class A auto body surfacing.
 
It should get you into an engineering laboratory, building prototypes and taking data and such. Most likely the wrenches and the workpieces will be relatively clean, and you won't usually have to work in mud or freezing rain.

Or, it could be a stepping stone to something else. Nobody knows what, so work hard, learn all you can about _everything_, pay attention, and watch where you step.



Mike Halloran
Pembroke Pines, FL, USA
 
It would certainly be worth it. I started out as an AAS, and after 2 years in my first job, I was able to go to University for 3 years full-time to get my BS. I didn't have to borrow money from anyone, I paid all my tuition and books myself.
 
thanks alot for the replies !!!

looking to here from more members around here :)
 
I wouldn't be as sanguine about an AAS, given the large number of currently unemployed engineers. In any head to head comparison, an AAS will generally lose out over a BS.

TTFN
faq731-376
7ofakss

Need help writing a question or understanding a reply? forum1529
 
Not necessarily true, IRStuff. The BS'ers are often viewed as overqualified and overpriced.
 
Regarding BS'ers, I was taught in the military that the ability to BS was essential to career growth. :eek:)
 
Anyhoo...

I'd get the AAS in ME. IF you can do the ME, you ought to be able to qualify as a drafter. Sooner or later you'll likely grow weary of being an AAS and want to move onward and upward. Starting down the ME path will get you a better boost toward later qualifications.
 
thank you very much for the replies and opinions guys!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor