Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus Compression after impact test

Status
Not open for further replies.
es0007

es0007

Materials
Nov 24, 2011
2
Hi all,

I am trying to simulate Compression after impact tests with Abaqus. I made the modelling and checking the results.

My questuion is which values I need to consider to find out residual strenght on the materials. For example: Mises, Max.Principal, Mid. Principal,Pressure vs..

Thanks all

 
Status
Not open for further replies.

Similar threads

A
  • Question
ABAQUS cmd line job seemingly freezes after a long time
Replies
1
Views
1K
FEA way
FEA way
Faiz1
  • Locked
  • Question
ABAQUS Explicit-Multiple Particles Impact-Need to stop bouncing after impact
Replies
4
Views
195
Faiz1
Faiz1
M
  • Question
Impact force
Replies
3
Views
2K
FEA way
FEA way
N
  • Question
ABAQUS FASTENER
Replies
1
Views
1K
FEA way
FEA way
Sri QUB
  • Locked
  • Question
3D compression test job aborts after 10% solving
Replies
1
Views
67
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top Bottom