Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ABAQUS constraints

Status
Not open for further replies.
karthik261262

karthik261262

Mechanical
Joined
Feb 6, 2017
Messages
6
Location
US
Hello all,

I am new to ABAQUS, I have two gears which are on the same shaft, one is the driving gear which receives the input from the rack.

I have to model rack and pinion constraint and constraint between pinion and gear, that is pinion and gear have same angular velocity but different linear velocity.

I have the rack, pinion and gear designs, I have to import these mesh them and apply the constraints.

Can anyone help me with this?

Thanks,
Karthik
 
Status
Not open for further replies.

Similar threads

Nir_k
  • Locked
  • Question Question
Failure of symmetric boundary constraints in Abaqus
Replies
1
Views
2K
FEA way
FEA way
vikram manoj
  • Question Question
Abaqus-Isight
Replies
5
Views
16K
snow83
S
A
Abaqus help
Replies
2
Views
8K
ArijitME
A
I
  • Question Question
Wear in abaqus
Replies
8
Views
15K
Rama27
R
I
  • Locked
  • Question Question
Abaqus subroutine
Replies
3
Views
3K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top