Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Abaqus/Standard CPRESS Area

Status
Not open for further replies.
MarceloM

MarceloM

Mechanical
Sep 10, 2018
53
Hello,

How can i see the contact area between 2 bodys after a simulation?

Thank you.
 
Replies continue below

Recommended for you

Sort by date Sort by votes
You can request CNAREA as field output. It's not requested by default.
 
Upvote 0 Downvote
And/or request CAREA as history output for the contact pair.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nilesh_dot
  • Question
Problem during linking - Abaqus/Standard User Subroutines
Replies
2
Views
309
nilesh_dot
nilesh_dot
Smadar11
  • Locked
  • Question
ABAQUS- stractural model- fine elements in crack area
Replies
3
Views
94
FEA way
FEA way
MPa94
  • Locked
  • Question
Fully coupled thermal-stress analysis in Abaqus/Standard- equations
Replies
8
Views
168
FEA way
FEA way
DavidMcArthur
  • Question
ABAQUS Explicit Damage
Replies
2
Views
267
DavidMcArthur
DavidMcArthur
mj345
  • Question
Suppress edges in Abaqus
Replies
2
Views
771
mj345
mj345

Part and Inventory Search

Sponsor

Back
Top Bottom