ABB Freelance

[ToreWassen]

Hi,

I'm totally new top this forum and I know that ABB Freelance is a DCS, not a PLC, but I guess that this the nearest I can get to the experienced guys.
I run 9 emulators in a big plant simulator, Freelance 2019 SP1 FP1 RU02.
The problem is that individual task hang after a relatively short time and I have to do a warm start of the controller.
Time between hang differ depending on PC but high load on the PC don't affect this period.
The PC that run with highest load has longest time between hang, strange...
Anyone with good ideas?

/tore

 

[RedSnake]

If you have My Control System, Data Collector it might be a good start.

https://search.abb.com/library/Download.aspx?DocumentID=3BDD015188&LanguageCode=en&DocumentPartId=&Action=Launch

 

[ToreWassen]

If you have My Control System, Data Collector it might be a good start.

https://search.abb.com/library/Download.aspx?DocumentID=3BDD015188&LanguageCode=en&DocumentPartId=&Action=Launch

Thanks, this pamphlet was new for me.
I forgot, in my first post, that I have worked with system Freelance since 1995, then under the name Digimatik.
I have educated in Scandinavia for about 25 years about how to handle Freelance.
/tore