ABB REF541, RET543, REM543, REX521 & REC670 2

[radug]

Hello,

I am looking for the protection function manuals of the ABB relays of the subject. I am from Spain and have already contacted with ABB in Spain with no success, except for the manual of their ANSI 49 function. The manuals are not in their website, or at least I have been unable to locate them.

As I need them urgently because I have to finish a PDC study, has anybody those manuals in pdf?


Thanks in advance, bye, Radug.

 

[slavag]

Hi Radug.
It's hungreds of MB's. ABB send it today on the CD only
What are functions you need?
Please send to forum list of function and I will attached you manuals. REC67o, it will be problem, but i'll try solve it.
Best regards.
Slava.
BTW, if you need function 50,51,50N,51N are same for the REF/RET/REM/REX.

 

[slavag]

Hi Radug.
Found few functions.
Please pay attention for the REF you use TOL3cab 49 function, for the REM/RET TOL3Dev.
For REX521 H07 you will use Tol3Dev too.

 

[radug]

Thank you very much, Slavag.

ANSI functions I will use are:
50/51
50N/51N
51G
25
27
46
51RB
87

And for the REM43, I also need MotStart function.


Thanks.

 

[slavag]

Hi Radug.
I sended to you 50,51, 50N,51N manuals.
51G, 51RB are same functions, you can build all by logic and setting.
Other functions, I'll send to you, tomorrow.
REC670, I haven't yet, I asked my partners for the help.
Of course you meant 87T and 87M/G
Regards.
Slava

 

[slavag]

Hi Radug.
Please find attached.
Good Luck
Slava.

 

[slavag]

Hi Radug.
RE_670 is problem, please try again local ABB or ask directly ABB Sweeden. It's lot of information and manuals.
Regards.
Slava

 

[radug]

Slavag: thank you. You say "51G, 51RB are same functions". I thought 51N and 51G where the same functions, but not 51RB.

Bye, Radug.