ABB REF615 IED

[warickwrx]

Hi

I would like to know if anyone knows what the default password is for this device, and secondly if it needs to be set to use the webpage interface from the front port. I turned on the setting under the HMI menu however it still does not display the WHMI. Any experiences ?

 

[JG2828]

REF615 default passwords can be found on page 110 of the Operations Manual. Link below.
There is also a lot of information about the web HMI in there. You may want to read through it. The web HMI should be enabled by default. If you had to enable it you will need to reboot the relay to get the changes to take effect.