EddyWirbelstrom
Electrical
- Feb 17, 2002
- 215
ABB VFD Drive Software
I need to determine the harmonic currents injected into system impedance by ABB ACS580 VFDs where the following has already been installed:
- Transformer: 33000/415V, 2500kVA, urz = 6.25%,Dyn11
- ABB ACS580 VFDs
The ABB DriveSize software does not allow entry of above data, instead it selects transformer and VFD size and does not allow user sizes to be entered.
Is ABB software available where the user can enter Utility data, transformer size and VFD / motor sizes ?
My requests to ABB remain unanswered.
I need to determine the harmonic currents injected into system impedance by ABB ACS580 VFDs where the following has already been installed:
- Transformer: 33000/415V, 2500kVA, urz = 6.25%,Dyn11
- ABB ACS580 VFDs
The ABB DriveSize software does not allow entry of above data, instead it selects transformer and VFD size and does not allow user sizes to be entered.
Is ABB software available where the user can enter Utility data, transformer size and VFD / motor sizes ?
My requests to ABB remain unanswered.