I have interfaced in my P&ID diagram to some abbrivation which I don't have any refrence to recognize them. for instance when I have PIA, It mean's pressure indicator with alarm. but I need a standard list which I can verify any abbrivation. any information will be highly appriciated.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
abbrivation introduce for instrumentation
- Thread starter RE52
- Start date
As a note, PI with alarms are still usually tagged as a PI. The alarm is shown either as a second bubble, or an alarm to the PI.
Not to say that PIA is incorrect, it is just that I have never seen a tag PIA-xxx. It is usually PI, or PI and PAH/L.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
Not to say that PIA is incorrect, it is just that I have never seen a tag PIA-xxx. It is usually PI, or PI and PAH/L.
"Do not worry about your problems with mathematics, I assure you mine are far greater."
Albert Einstein
Have you read FAQ731-376 to make the best use of Eng-Tips Forums?
FYI,
There is a separate forum, ISA (control systems engineering) Code Issues Forum, that covers similar issues.
Home > Forums > Engineering Codes, Standards & Certifications > Engineering Codes, Standards & Certifications
ISA (control systems engineering) Code Issues Forum
Dan
There is a separate forum, ISA (control systems engineering) Code Issues Forum, that covers similar issues.
Home > Forums > Engineering Codes, Standards & Certifications > Engineering Codes, Standards & Certifications
ISA (control systems engineering) Code Issues Forum
Dan
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question