about thermoplastic piping design and installation standard

[guanghui an]

who know if America or European have thermoplastic piping design and installation standard? thanks!

 

[robyengIT]

Google :
1 - plastic pipe institute (USA)
2 - Asetub (Spain)

PS : not really standards but standardized design manuals

 

[mk3223]

What is the industry the plastic piping to be applied to, the processdetails, or above or under ground system?

 

[LittleInch]

"thermoplastic" is a bit of a broad definition.

Do you mean Poly Ethylene? or something else.

There are many standards for PE, mainly material specifications.
size, pressure, duty and country of use might narrow it down a bit.

Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[guanghui an]

@robyengIT
I have found some manual at PPI, and I also found some manual at PPFA(plastic pipe and fitting association). thanks for you prompting.

@mk3223
these plastic pipes are used in waste water treatment plant, used as chemical dosing pipes, above ground.
Thanks for your reply.

@littleinch
yes, I mean some HDPE/PVC/GRP pipes.
I know some material standard, such as ASTM standard, I want to find the general technical piping standard for HDPE/PVC/GRP pipes.
thanks your prompting.