Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

absorption chiller

Status
Not open for further replies.

wj33

Mechanical
Feb 21, 2003
19
Is it possible to freeze the evaporator in a single stage absorption chiller with the unit off but with condenser pump on and tower water flowing through the condenser and chilled water pump off and no water flow through the evaporator?
 
Replies continue below

Recommended for you

I dont see how it can unless it wasnt shut down properly. Did the unit go thru a dilution cycle before it was shut down?
 
Yes the unit had been shut down for a while, it is a backup chiller
Tubes approx 60 cracked in the evap. I know this can happen if the chilled water pump goes out but this happened with only water flowing through condenser.
 
Are you running Nitrate inhibitors in this machine? Are the ammonia levels high in it if you are? Sounds like ammonia stress cracking to me if its a nitrate inhibited machine.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor