ACAD Mech 2006 toggle full screen mode 1

[jlcochran1]

I was playing around with a new copy of ACAD Mechanical 2006 and set to full screen mode, I thought from the pull down menus. I cannot find what I did to set or reset back to normal mode. Didn't see much in help.

How do you toggle back and forth between full screen and normal mode?

 

[Exxit]

jlcochran1,

for ADT fullscreenoff or fullscreen

Lothar

ADT 2004
ACAD 2002

 

[IFRs]

Could also be Ctrl-0. That's zero not oh

 

[jlcochran1]

Both of the above worked. Finally realized where I had found initially was the Express/Tools/Full-Screen AutoCAD pull down menu.

 

[Exxit]

@IFRs
thanks for the input...!
But do You know, why ctrl+0 on the number block is not working?

Lothar

ADT 2004
ACAD 2002

 

[IFRs]

It's a different scan code from the keyboard. I guess Autodesk only wanted to trap one. What bugs me is if you are in full screen mode and you close your last drawing, you are stuck there!!!

 

[malaycobra]

I believe if you move the cursor to the very top of the screen, the standard menu bar drops down. You can then enter express tools and turn off full screen mode.