We are producing pre-cast elements and stripping after 5 hours in a shop with a temp of 60 degrees.Mix consists of 415kg of cement with the addition of a 2% of a non cloride additive. We are experiercing a softness and briddle nature of the hardened concrete even after a number of days in the field.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Accelerated Concrete Problems
- Thread starter facca
- Start date
Similar threads
- Locked
- Question